This beautiful papercraft reproduces the NK0, the small NANKAI MER ferry seen in the movie TOKYO MER - Mobile Emergency Room: Nankai Mission, and was created by MER Project Promotion Department (Unofficial), responsible for the Japanese profile @ksmt_r.
The model takes up only two A4 sheets and, in addition to the ferry itself, the templates include a customized display base decorated with NANKAI MER logos and even a tiny version of the NK1, the special emergency vehicle carried by the boat in the movie. The scale is not specified by the author. Judging only by the size of the parts arranged on the sheets, I would say that it is probably somewhere between 1/100 and 1/150 scale, but this is only an estimate.
Although relatively small, the model has a nice level of detail. The NK0 features a hull made from several parts, a vehicle deck, upper cabin, stairs, roof sections, ramp and railings. There are also some optional parts marked by the author as Quality Up, which can replace simpler pieces and add a little more detail to the finished model. Some of the large side openings can also be cut out, making the interior more visible.
The templates indicate where certain pieces should be rounded or gently curved to follow the shape of the hull, and they also make it clear that some small details of the papercraft differ from those of the vessel used during filming. In other words, it is a very recognizable reproduction of the NK0, naturally adapted to the limitations of a paper model of this size.
In the movie, the NK0 is the dedicated ferry of NANKAI MER, with the important job of carrying the NK1 between the islands. The NK1 is a large emergency vehicle equipped with an operating room. The story follows a medical team created to respond to accidents and disasters on islands in the region between Okinawa and Kagoshima, where quickly transporting doctors and medical equipment by sea can be essential.
One especially interesting fact is that the NK0 was not simply created with computer graphics or built as a studio prop. The boat actually exists. It is the Ferry Kairyu, which had been operating in the Nagashima area of Kagoshima since 2009, providing local maritime transportation and connecting Nagashima with nearby islands, including Shishijima. A producer of the movie came across the vessel during a visit to the region, and it was eventually chosen to become the NK0.
After filming, the Kairyu remained moored at Ikara Island still wearing the white, red and blue NANKAI MER colors. Following the release of the movie, fans began visiting the area simply to see the real “NK0” in person, turning the little ferry into an unexpected attraction for admirers of the series.
When publishing the templates, @ksmt_r recommended using A4 paper suitable for papercraft and commented that he would be very happy to see MER fans building their own NK0. The author also pointed modelers to the replies to the original post, where additional information about the assembly was provided.
As a Papermau tip, I believe paper between 120 and 160 g/m² should be a good choice for the ferry, especially because of the small parts, curved sections and railings. For the display base, 180 or 200 g/m² paper can provide a little more rigidity. Scoring the fold lines before the final cutting and using glue sparingly should also make the assembly easier, particularly around the smaller parts of the cabin, stairs and upper structure.
Este belo papercraft reproduz o NK0, o pequeno ferry da NANKAI MER visto no filme TOKYO MER – Mobile Emergency Room: Nankai Mission, e foi criado por MER Project Promotion Department (Unofficial), responsável pelo perfil japonês @ksmt_r.
O modelo ocupa apenas duas folhas A4 e, além do ferry, os templates trazem uma base de exposição personalizada com os logotipos da NANKAI MER e até uma pequena versão do NK1, o veículo especial transportado pelo barco no filme. A escala não é informada pelo autor. Observando apenas o tamanho das peças distribuídas nas folhas, eu diria que deve estar em algum ponto entre 1/100 e 1/150, mas esta é apenas uma estimativa.
Mesmo sendo relativamente pequeno, o modelo tem um bom nível de detalhes. O NK0 possui casco formado por várias peças, convés para veículos, cabine superior, escadas, cobertura, rampa e guarda-corpos. Há ainda algumas peças alternativas marcadas pelo autor como Quality Up, que podem ser usadas para substituir partes mais simples e deixar o resultado final um pouco mais detalhado. Algumas das grandes aberturas laterais também podem ser recortadas, deixando o interior mais visível.
Os templates indicam onde certas peças devem ser arredondadas ou curvadas para acompanhar o formato do casco e também deixam claro que alguns pequenos detalhes do papercraft são diferentes dos existentes na embarcação usada nas filmagens. Ou seja, trata-se de uma reprodução bastante reconhecível do NK0, mas adaptada naturalmente às limitações de um modelo de papel deste tamanho.
No filme, o NK0 é o ferry exclusivo da NANKAI MER e tem a missão de transportar entre as ilhas o NK1, um grande veículo de emergência equipado com uma sala de cirurgia. A história acompanha uma equipe médica criada para atender acidentes e desastres em ilhas da região entre Okinawa e Kagoshima, onde levar rapidamente médicos e equipamentos pelo mar pode ser essencial.
Uma curiosidade muito interessante é que o NK0 não foi criado apenas por computação gráfica ou como um cenário de estúdio. O barco existe de verdade. Trata-se do Ferry Kairyu, que operava desde 2009 na região de Nagashima, em Kagoshima, funcionando no transporte marítimo local e ligando Nagashima a ilhas próximas, entre elas Shishijima. Um produtor do filme conheceu a embarcação durante uma visita à região e ela acabou sendo escolhida para representar o NK0.
Depois das filmagens, o Kairyu permaneceu atracado na Ilha de Ikara ainda usando a pintura branca, vermelha e azul da NANKAI MER. Com o lançamento do filme, fãs começaram a visitar o local apenas para conhecer de perto o “NK0” verdadeiro, transformando o pequeno ferry em uma inesperada atração para admiradores da série.
Ao publicar os templates, @ksmt_r recomendou papel A4 próprio para papercraft e comentou que gostaria muito que os fãs de MER construíssem sua versão do NK0. O autor também indicou as respostas da publicação original para informações adicionais sobre a montagem.
Como dica do Papermau, acredito que papel entre 120 e 160 g/m² seja uma boa escolha para o barco, principalmente por causa das peças pequenas, curvas e dos guarda-corpos. Para a base, papel de 180 ou 200 g/m² pode dar um pouco mais de rigidez. Vincar as linhas de dobra antes do corte final e usar pouca cola também deve ajudar bastante, principalmente nas partes menores da cabine, escadas e estrutura superior.
If you are a fan of TOKYO MER or simply enjoy unusual vehicle and ferry papercrafts, you can download the NK0 templates at the link below:
Nankai MER NK0 Emergency Rescue Ferry Papercraft - by MER Project Promotion Department
Below you will find four more papercrafts of boats and ships previously featured here on Papermau:
01: Gunboat Marques Del Duero Paper Model - by Jesus Maria López
02: Onomichi Island Ferry Miniature Paper Model - by Barrack Model
03: Mondorf - Bonn Ferry Boat Paper Model In 1/72 Scale - by Kallboys
04: WW2`s HMS Flower Class Corvette Buttercup K193 Paper Model - by Masayu-i
No comments:
Post a Comment