Showing posts with label movies. Show all posts
Showing posts with label movies. Show all posts

Saturday, February 1, 2025

Star Trek - Transport Shuttle USS Enterprise NCC-1701 Paper Model
by Paper Aviation

In the movie Star Trek (2009), directed by J.J. Abrams, there is a military transport ship that appears in a brief scene. 

It was the model used by German designer and modeler Martin Sänger, from the website Paper Aviation, to create this papercraft of the military transport shuttle USS Enterprise NCC-1701. 

Mr. Sänger says that the entire model is made up of 91 pieces divided into four sheets of paper and that, because it has clear lines and straight edges, it becomes a very interesting papercraft for beginners. 

The scale is not given, but when printed on A4 sheets, the dimensions of the model are 23 cm long, 14.8 cm wide and 5.7 cm high. 

Below, three interesting facts about the 2009 film Star Trek: 

Leonard Nimoy, the original Spock from the classic series, returned to the role in the film, being one of the few actors from the original series to participate in the reboot. 

The creature that chases Kirk on the icy moon Delta Vega was created for the film and does not appear in the original series. Its appearance resembles a cross between a crab and an alien predator. 

There is a Star Wars Easter egg in the film that can be seen in a scene set in space. The special effects team inserted a model of R2-D2 floating among the wreckage as a fun homage to Star Wars.

No filme Star Trek (2009), dirigido por J.J. Abrams, há uma nave de transporte militar que aparece em uma breve cena. 

Foi o modelo usado pelo designer e modelista alemão Martin Sänger, do site Paper Aviation, para criar este papercraft do Ônibus de transporte militar USS Enterprise NCC-1701. 

O Sr. Sänger diz que o modelo todo é composto de 91 peças divididas em quatro folha de papel e que, por ter linhas claras e bordas retas, torna-se um papercraft muito interessante para iniciantes. 

A escala não é informada, mas quando impresso em folhas de formato A4, as dimensões do modelo são de 23 cms de comprimento, 14,8 cms de largura e 5,7 cms de altura. 

Abaixo, três curiosidade ssobre o filme Star Trek, de 2009: 

Leonard Nimoy, o Spock original da série clássica, voltou ao papel no filme, sendo um dos poucos atores da série original a participar do reboot.

A criatura que persegue Kirk na lua gelada Delta Vega foi criada para o filme e não aparece na série original. Sua aparência lembra um cruzamento entre um caranguejo e um predador alienígena. 

Há um Easter Egg de Star Wars no filme que pode ser visto em uma cena no espaço. A equipe de efeitos especiais inseriu um modelo de R2-D2 flutuando entre os destroços, como uma homenagem divertida a Star Wars.


Link:
Star.Trek.Transport.Shuttle.USS.Enterprise.NCC.1701.Paper.Model.by.Paper.Aviation


More Star Trek Paper Models related posts:








Thursday, January 23, 2025

Deadpool & Wolverine Miniature Paper Toys - by Mr. Demand

I don’t know about you, but I think it’s about time we took a break from superhero movies. Even the ones that don’t take themselves too seriously, like these two characters, feel a bit overdone. 

That said, for those who still enjoy them, here are two cool paper toys of Deadpool and Wolverine. 

They were created by the talented Spanish designer Mr. Dmand from the website Dmand Mini Papercraft. 

On the website, you can download the paper toys of Deadpool and Wolverine, the latter without the mask. 

To download the paper toy of Wolverine in his full costume, simply visit Mr. Dmand's Instagram.

Eu não sei vocês, mas acho que já passou da hora de darem uma pausa nos filmes de super-heróis. Mesmo aqueles que não se levam tão a sério, como é o caso destes dois personagens, já estão um pouco saturados. 

De qualquer forma, para quem ainda curte, aqui estão dois paper toys bem legais do Deadpool e do Wolverine. 

Eles foram criados pelo talentoso designer espanhol Mr. Dmand, do site Dmand Mini Papercraft. 

No site, você poderá baixar os paper toys do Deadpool e do Wolverine, sendo este último sem a máscara. 

Já para baixar o paper toy do Wolverine com o traje completo, basta visitar o Instagram do Mr. Dmand.


Link:
Deadpool.&.Wolverine.Miniature.Paper.Toys.by.Mr.Demand


More Original Paper Toys by Mr. Dmand related posts:








Friday, December 6, 2024

James Bond - 1977`s Lotus Sprit Submarine Paper Model In 1/35 Scale
by Paper Diorama

Created by the talented team from the Italian website Paper Diorama, here is a perfect paper model version in 1/35 scale of the iconic Lotus Esprit Submarine from the James Bond film "The Spy Who Loved Me." 

The entire model fits on just two printed sheets: one for the vehicle and another for the display stand that mimics the ocean depths. 

The Lotus Esprit Submarine, known as "Wet Nellie," was featured in the James Bond film "The Spy Who Loved Me". In the movie, the car impresses not only as a land vehicle but also transforms into a functional submarine, showcasing the signature creativity of the franchise's gadgets. 

The car was designed in 1976 by Lotus, with styling by Giorgetto Giugiaro. The submarine conversion was executed by Perry Oceanographic. In 1977, the film was released, elevating the Esprit to cultural icon status. 

The submarine vehicle used in the film was auctioned for approximately $920,000 and purchased by Elon Musk, who planned to turn it into a fully functional vehicle. 

The submarine version used in the film was not just a prop; it was a real, functional submarine called "Wet Nellie," operated by professional divers. However, it could not be driven like a car and required complex equipment to operate. 

For one of the scenes, where the Esprit "drives" into the water before transforming, a scale model was used instead of the real car. Many viewers didn’t notice the switch due to skillful editing. 

Before being auctioned in 2013, the vehicle was discovered in a shipping container in a storage unit in Long Island, New York. It was purchased for just $100 at a "blind" auction. The buyer had no idea what was inside until opening the container. 

Attention: The templates shown in the third image of this post are for illustrative purposes only. Visit the Paper Diorama website to download the original high-resolution templates.

Criado pela talentosa equipe do site italiano Paper Diorama, eis aqui uma perfeita versão em papel na escala 1/35 do icônico Lotus Esprit Submarine do fime "The Spy Who Loved Me" da franquia James Bond. 

O modelo todo ocupa apenas duas folhas impressas: uma para o veículo e outra para o suporte de exposição que imita as profundezas do oceano.

O Lotus Esprit Submarine, conhecido como "Wet Nellie," foi destaque no filme de James Bond "The Spy Who Loved Me". No longa, o carro não apenas impressiona como veículo terrestre, mas também se transforma em um submarino funcional, demonstrando a criatividade característica dos gadgets da franquia. 

O carro foi concebido em 1976 pela Lotus, com design de Giorgetto Giugiaro. A conversão para o submarino foi feita pela Perry Oceanographic. Em 1977 o filme foi lançado, catapultando o Esprit ao status de ícone cultural. 

O veículo submarino usado no filme foi leiloado por cerca de $920,000 e comprado por Elon Musk, que planejou transformá-lo em um verdadeiro veículo funcional. 

A versão submarina usada nas filmagens não era apenas cenográfica, ela era um verdadeiro submarino funcional chamado "Wet Nellie", controlado por mergulhadores profissionais. No entanto, não era dirigível como um carro e exigia equipamentos complexos para operar. 

Para uma das cenas, onde o Esprit "dirige" na água antes de se transformar, foi usado um modelo em escala e não o carro real. Muitos espectadores não perceberam a troca devido à habilidade da edição. 

Antes de ser leiloado em 2013, o veículo foi descoberto em um contêiner em um depósito de Long Island, Nova York, adquirido por apenas $100 em um leilão "cego". A pessoa que comprou não fazia ideia do que havia dentro até abrir o contêiner. 

Atenção: os templates mostrados na imagem logo abaixo são apenas para efeitos ilustrativos. Visite o site da Paper Diorama para baixar os templates originais em alta resolução.


Link:
James.Bond.1977`s.Lotus.Sprit.Submarine.Paper.Model.In.1/35.Scale.by.Paper.Diorama

Sunday, October 20, 2024

Halloween Special - Terrifier - Art The Clown Paper Toy - by Mr. Dmand

Created by Spanish designer Mr. Dmand, from the Dmand Mini Papercraft website, here are two really cool paper toys of Art the Clown from the Terrifier horror film series. 

Mr. Dmand said: - "Art's new paper toy from the Terrifier films is now available for download. Art has undoubtedly become one of the icons of modern horror, ready for his 3rd film that promises to be fun and very grotesque." 

Terrifier is a film series that stands out for its extremely violent slasher style and the presence of the iconic villain Art the Clown. 

 Art the Clown, the main villain, is a disturbing and terrifying figure. He is mute, but expressive, using exaggerated gestures and a grotesque appearance to create fear. 

Unlike other killer clowns in cinema, Art does not speak and is relentless in his brutality, becoming a modern icon of horror for his disturbing presence and extreme acts of violence. 

The plot follows a group of young people who come across a sadistic, murderous clown named Art the Clown on Halloween night. 

The film is known for its graphic violence and dark atmosphere, mixing slasher elements with psychological horror. 

At an UK cinema premiere, the third film, which premiered on October 11, 2024, saw 11 people walk out of the theater and one person vomit in the first ten minutes alone. 

The success of this type of hardcore film makes me think that people are increasingly brutalized by real-world violence and that the only way to shock them is to push the limits. 

There is no need for a good story or something new, just blood, guts, suffering and lots of gratuitous violence.

Criado pelo designer espanhol Mr. Dmand, do site Dmand Mini Papercraft, aqui estão dois paper toys bem legais do Palhaço Art, da série de filmes de terror Terrifier. 

Mr. Dmand disse: - "O novo papertoy da Art dos filmes Terrifier já está disponível para download. Sem dúvida Art se tornou um dos ícones do terror moderno, pronto para seu 3º filme que promete ser divertido e muito grotesco." 

Terrifier é uma série de filmes que e se destaca por seu estilo slasher extremamente violento e pela presença do icônico vilão Art the Clown. 

Art the Clown, o principal vilão, é uma figura inquietante e aterrorizante. Ele é mudo, mas expressivo, utilizando gestos exagerados e uma aparência grotesca para criar medo. 

Diferente de outros palhaços assassinos no cinema, Art não fala e é implacável em sua brutalidade, tornando-se um ícone moderno do terror por sua presença perturbadora e atos extremos de violência. 

A trama segue um grupo de jovens que cruzam com um sádico palhaço assassino chamado Art the Clown em uma noite de Halloween. 

O filme é conhecido por sua violência gráfica e atmosfera sombria, misturando elementos de slasher com horror psicológico. 

Em uma exibição de lançamento em um cinema britânico, o terceiro filme que estreou em 11 de outubro de 2024, registrou 11 saídas da sala e um caso de vômito, isso apenas nos dez minutos iniciais. 

O sucesso desse tipo de filme hardcore me faz pensar que as pessoas estão cada vez mais embrutecidas pela violência do mundo real e que para chocá-las, somente indo cada vez além dos limites. 

Não há necessidade de uma boa história ou algo novo, apenas sangue, tripas, sofrimento e muita violência gratuíta.


Link:
Terrifier.Art.The.Clown.Paper.Toy.by.Mr.Dmand


More Paper Models of Classic Monsters related posts: