Showing posts with label american. Show all posts
Showing posts with label american. Show all posts

Sunday, April 13, 2025

Mooneyes & Speed Rascal Slingshot Dragster Paper Toys In SD Style
by Papermau - Download Now!

These paper toys of two SD-style (super deformed) slingshot dragsters each fit on a single printed sheet and are very easy to assemble. 

One of them is the Mooneyes, inspired by the famous dragster of the same name, the kind that even people who know nothing about drag racing have probably seen somewhere. The other is the Speed Rascal, an original creation of mine. 

If you place a coin inside the rear section (as shown in the sixth photo), the little car will tilt upward, as if launching in a wheelie toward the finish line. 

The Mooneyes Dragster, created by Dean Moon in the late 1950s, is one of the most iconic slingshot dragsters of the golden age of drag racing. 

With the engine up front and the driver seated behind the rear axle, this style of car made its mark on American tracks, especially in the Top Gas category, which used gasoline as fuel. 

More than just speed, the Mooneyes stood out for its bold design and the unmistakable yellow "eyes", the symbol of the Mooneyes brand, which became a global icon in the custom and hot rod culture. 

In 1963, the Mooneyes made history as the first American dragster to compete in Japan, during a demonstration event that helped popularize American motorsports in the country and laid the foundation for the Japanese custom scene. 

Today, the Mooneyes Dragster is more than just a racing machine, it's an automotive culture icon, a symbol of an era when creativity and speed went hand in hand.

Estes paper toys de dois slingshot dragsters em estilo SD (super deformado) ocupam apenas uma folha impressa cada um e são bem fáceis de montar. 

O Mooneyes foi inspirado no famoso dragster homônimo que até quem não sabe nada de corridas de dragsters já deve ter visto em algum lugar, e o outro é o Speed Rascal, uma invenção minha. 

Se você colocar uma moeda na parte traseira, por dentro (sexta foto), o carrinho ficará empinado, em uma arrancada rumo a linha de chegada. 

O Mooneyes Dragster, criado por Dean Moon no final dos anos 1950, é um dos mais emblemáticos slingshot dragsters da era dourada do drag racing. 

Equipado com motor dianteiro e piloto posicionado atrás do eixo traseiro, esse estilo de carro marcou época nas pistas americanas, especialmente na categoria Top Gas, que utilizava gasolina como combustível. 

Mais do que velocidade, o Mooneyes se destacou pelo visual arrojado e pelos inconfundíveis "olhinhos" amarelas, símbolo da marca Mooneyes, que virou referência na cultura custom e hot rod mundial. 

Em 1963, o Mooneyes fez história ao ser o primeiro dragster americano a competir no Japão, durante uma exibição que ajudou a popularizar o automobilismo americano no país e lançou as bases para a cena custom japonesa. 

Hoje, o Mooneyes Dragster é mais do que uma máquina de corrida: é um ícone da cultura automotiva, símbolo de uma era onde criatividade e velocidade andavam lado a lado.


Link:
Mooneyes & Speed Rascal Slingshot Dragster Paper Toys- by Papermau - Download Now!


More Easy-To-Build Papermau Original Paper Toy Vehicles related posts:








Tuesday, April 8, 2025

Globe Slicers Facade Paper Model - by Papermau - Test Assembly Completed

I just finished the Beta assembly of the Globe Slicers facade and everything fit together perfectly, as you can see in the photos in this post. 

The only things that are not made of paper in the model are the side panel support and the wire coming out of the air conditioning, which were made with a toothpick and gardening wire. 

This model was made from a front photo of the Globe Slicers facade. I took this photo, opened it in MsPaint and "cut out" each part that could be detached, both inside (doors and windows) and outside the facade (panels and air conditioning). 

Once everything was separated, all that was left was to create the tabs and try to organize everything on the sheets for printing (which I'm still doing). 

In this test assembly, the way I arranged the pieces on four A4 sheets made the finished model approximately 1/35 scale. More soon.

Acabei de concluir a montagem Beta da fachada da Globe Slicers e tudo se encaixou com perfeição, como pode ser visto nas fotos deste post. 

As únicas coisas que não são feitas de papel no modelo são o suporte da placa lateral e o fio que sai do ar condicionado, que foram feitos com um palito de dentes e arame de jardinagem. 

Este modelo foi feito a partir de uma foto frontal da fachada da Globe Slicers. Eu peguei essa foto, abri no MsPaint e fui "recortando" cada parte que poderia ser destacada, tanto para dentro (portas e janelas) quanto para fora da fachada (placas e ar condicionado). 

Depois de tudo separado, foi só criar as abas e tentar organizar tudo nas folhas para impressão (o que ainda estou fazendo). 

Nessa montagem de teste, o modo como arranjei as peças em quatro folhas de formato A4 fez com que o modelo terminado ficasse em uma escala aproximada de 1/35. Mais em breve.


Below, two more papercraft facades inspired by buildings that really exist:





Thursday, April 3, 2025

Globe Slicers Facade Paper Model - by Papermau - A Work In Progress

I'm working on a papercraft of the Globe Slicers storefront, a shop that frequently appears in searches for classic New York façades. 

Globe Slicers is a company specializing in restaurant equipment, founded in 1947. For decades, it has stood out in the sale and maintenance of meat slicers, grinders, and other industrial kitchen tools. 

Today, it operates at 266 Bowery, New York, providing services and selling parts for commercial kitchen machines. 

In the 1970s, the upper floor of this building was home to Chris Stein, guitarist of Blondie, and vocalist Debbie Harry. 

The space served as a small creative hub, frequented by artists and musicians from the punk and new wave scenes. 

Many people believe that Globe Slicers was already operating at this location during that time, associating it in some way with Blondie. 

However, the ground floor of the building actually housed a liquor store back then. Globe Slicers only moved to 266 Bowery later, relocating from a nearby address. 

Today, in addition to being a well-established business in the kitchen equipment industry, the location holds a piece of New York's musical history. 

For this papercraft, I chose to use a reference photo showing Globe Slicers with its doors closed. 

I believe the image was taken in the 1980s, but I’m not entirely sure. More soon.

Estou trabalhando em um papercraft da fachada da Globe Slicers, uma loja que sempre aparece em pesquisas sobre fachadas clássicas de Nova York. 

A Globe Slicers é uma empresa especializada em equipamentos para restaurantes, fundada em 1947. Há décadas, se destaca na venda e manutenção de fatiadores de carne, moedores e outros utensílios industriais. 

Atualmente, opera no 266 Bowery, Nova York, onde presta serviços e vende peças para máquinas de cozinha comercial. 

Na década de 1970, o andar superior desse prédio foi a residência de Chris Stein, guitarrista do Blondie, e da vocalista Debbie Harry. 

O espaço servia como um pequeno centro criativo, frequentado por artistas e músicos da cena punk e new wave. 

Muitas pessoas acreditam que a Globe Slicers já operava nesse local na época, associando-a de alguma forma ao Blondie, mas, na verdade, o térreo do prédio abrigava uma loja de bebidas alcoólicas naquele período. 

A Globe Slicers só se estabeleceu no 266 Bowery posteriormente, após se mudar de um endereço próximo. 

Hoje, além de ser uma empresa tradicional no ramo de equipamentos de cozinha, o local carrega um pedaço da história musical de Nova York. 

Para este papercraft, escolhi como referência uma foto que mostra a Globe Slicers com as portas fechadas. 

Acredito que essa imagem tenha sido tirada na década de 1980, mas não tenho certeza. Mais em breve.


Below, two more papercraft facades inspired by buildings that really exist:





Monday, March 31, 2025

Transformers - Optimus Prime Peterbilt 379 Semi-Truck Papercraft
by Paper Replika

Created by Indonesian designer and model maker Julius Perdana from the Paper Replika website, this Optimus Prime Peterbilt 379 papercraft in 1/72 scale faithfully represents the long and robust semi-truck that appeared in the 2007 film Transformers. 

With an imposing and stylized look, it stands out with its iconic red and blue flames on the hood, one of the signature features of this version of the character. 

Director Michael Bay aimed for a more modern and striking design for the big screen, choosing the Peterbilt 379, one of the most iconic trucks in the United States. 

The selected model featured a long, curved hood, setting it apart from the boxy appearance of the original 1980s Optimus Prime. 

To make it even more distinctive, stylized flames were added, giving it a dynamic touch and setting it apart from conventional truck designs. 

During filming, three identical Peterbilt 379 trucks were used for different scenes: one for road shots and others adapted for special effects. 

The truck also underwent several customizations, including taller chrome exhaust pipes and an extended chassis, enhancing its on-screen presence. 

Additionally, its wheels were fitted with special lighting, highlighting details in night scenes. 

The model in the first image of this post was built by model maker Mido's Vibes from Egypt. 

He also recorded a one-hour tutorial video, detailing each step of assembling the Optimus Prime Peterbilt 379. 

I found the video so well-made and useful that I decided to share it here as well. 

I extend my gratitude and full credit in this post to Julius Perdana for the beautiful model and to Mido's Vibes for the excellent tutorial.

Criado pelo designer e modelista indonésio Julius Perdana, do site Paper Replika, este papercraft na escala 1/72 do Optimus Prime Peterbilt 379 representa fielmente o caminhão semi-truck longo e robusto que apareceu no filme Transformers (2007). 

Com um visual imponente e estilizado, ele se destaca pelas icônicas chamas vermelhas e azuis no capô, uma das marcas registradas dessa versão do personagem. 

O diretor Michael Bay buscava um design mais moderno e impactante para as telonas, optando pelo Peterbilt 379, um dos caminhões mais icônicos dos Estados Unidos. 

O modelo escolhido possuía um capô longo e curvado, diferenciando-se do visual quadrado do Optimus Prime original dos anos 80. 

Para torná-lo ainda mais marcante, foram adicionadas chamas estilizadas, conferindo um toque dinâmico e afastando-o da aparência tradicional dos caminhões convencionais. 

Durante as filmagens, três Peterbilt 379 idênticos foram utilizados para diferentes cenas: um para tomadas de estrada e outros adaptados para efeitos especiais. 

O caminhão também passou por diversas customizações, como escapamentos mais altos, cromados e um chassi alongado, reforçando sua imponência na tela. 

Além disso, suas rodas receberam iluminação especial, destacando os detalhes em cenas noturnas. 

O modelo da primeira imagem deste post foi montado pelo modelista Mido's Vibes, do Egito. Ele também gravou um vídeo tutorial de uma hora, detalhando cada etapa da montagem do Optimus Prime Peterbilt 379. 

Achei o vídeo tão bem feito e útil que tomei a liberdade de publicá-lo aqui também. 

Deixo meus agradecimentos e todos os créditos deste post a Julius Perdana, pelo belo modelo, e a Mido's Vibes, pelo excelente tutorial.




Link:
Transformers.Optimus.Prime.Peterbilt.379.Semi.Truck.Papercraft.by.Paper.Replika


More Paper Models of Vehicles from Movies related posts:








Friday, March 28, 2025

The Ephemeral Museum - Ravnerede Castle Vintage Papercraft
Assembled by John Dunn

My friend John Dunn, from the USA, assembled this beautiful vintage paper model of a fictional castle, Ravnerede (Raven’s Nest). 

He kindly sent me some photos of his excellent work, and it is a pleasure to share them here on the blog. 

John said: - "This fantasy castle, Ravnerede, was printed in a Danish weekly, Illusteret Familie-Journal, in the early 1930s. 

The Great Depression was a world event and Europe was impoverished. Paper modeling was popular because even the poorest could afford it. 

This print was preserved and shared by Esben Rasmussen. We are so lucky to have these images preserved and shared. 

This is an easy build, and a good starter model. I always suggest a good base. Glue the printed base to some heavy cardboard or poster board. Press under weights for a day or two until totally dry and flat. 

This build goes easily, but there is a slight correction on the little tower by the bridge. You will find it easily if you size and dry fit.... 

When you download the files, get the original file with the highest resolution. This was printed on card stock, 8.5 x 11, laser printer." 

The Ravnerede paper model was originally published in Denmark and several other European countries by the magazine Illustreret Familie-Journal. 

Thanks to the work of Esben Rasmussen, a paper modeling enthusiast dedicated to preserving and digitizing historical cutouts, this rare piece has been rescued and made available for sharing. 

At the end of this post, you will find four links to download the complete model. 

Illustreret Familie-Journal was a highly influential Danish magazine, published between the late 19th and early 20th centuries. 

Founded in 1877 by Carl Aller, the magazine featured a variety of content, including serialized stories, illustrations, informative articles, and, often, cutouts and paper toys for its readers. 

Due to its affordable price, the publication became extremely popular among middle-class and working-class families, establishing itself as a landmark in the Danish publishing industry and European popular culture of the time. 

John Dunn is a longtime friend of this blog and has contributed numerous works to the Ephemeral Museum. 

At the end of this post, right after the links to download the castle templates, I have also included some links to other incredible models that he has kindly given me the honor of publishing. 

"Thank you, John, for another excellent work and for allowing me to share it here on the blog. Greetings from Brazil!" — Mauther

Meu amigo John Dunn, dos EUA, montou este belo modelo de papel antigo de um castelo fictício, o Ravnerede (Ninho do Corvo). 

Ele gentilmente me enviou algumas fotos de seu excelente trabalho, e é um prazer compartilhá-las aqui no blog. 

John comentou: - "Este castelo de fantasia, Ravnerede, foi publicado em um semanário dinamarquês, o Illustreret Familie-Journal, no início da década de 1930. 

Naquela época, a Grande Depressão afetava o mundo inteiro, e a Europa estava empobrecida. A modelagem em papel era uma opção acessível, já que até os mais pobres podiam se dar ao luxo de montar esses modelos. 

Esta impressão foi preservada e compartilhada por Esben Rasmussen, e temos muita sorte de contar com essas imagens digitalizadas e disponíveis para todos. 

A montagem deste modelo é simples, sendo uma ótima opção para iniciantes. Sempre recomendo começar com uma boa base: cole a base impressa em um papelão grosso ou papel-cartão, pressionando-a sob pesos por um ou dois dias para que seque completamente e fique plana. 

Embora seja uma construção fácil, há uma pequena correção na torre menor, próxima à ponte. Você a identificará facilmente ao ajustar as peças a seco antes de colar. 

Para garantir a melhor qualidade, baixe o arquivo original na resolução mais alta disponível. O modelo foi impresso em papel-cartão, usando uma impressora a laser no formato 8,5 x 11 polegadas." 

O modelo de papel do castelo Ravnerede foi originalmente publicado na Dinamarca e em diversos países da Europa pela revista Illustreret Familie-Journal. 

Graças ao trabalho de Esben Rasmussen, um entusiasta da modelagem em papel dedicado à preservação e digitalização de recortáveis históricos, essa peça rara pôde ser resgatada e compartilhada. 

No final deste post, você encontrará quatro links para baixar o modelo completo. A Illustreret Familie-Journal foi uma revista dinamarquesa de grande impacto, publicada entre o final do século XIX e o início do século XX. 

Fundada em 1877 por Carl Aller, a revista apresentava um conteúdo variado, incluindo histórias em série, ilustrações, artigos informativos e, frequentemente, recortáveis e brinquedos de papel para seus leitores. 

Graças ao seu preço acessível, a publicação tornou-se extremamente popular entre as famílias da classe média e trabalhadora, consolidando-se como um marco na indústria editorial dinamarquesa e na cultura popular europeia da época. 

John Dunn é um amigo de longa data aqui do blog e já contribuiu com diversos trabalhos para o Ephemeral Museum. 

No final deste post, logo após os links para baixar os templates do castelo, incluí também alguns links para outros modelos incríveis que ele gentilmente me deu a honra de publicar. 

"Obrigado, John, por mais um excelente trabalho e por me permitir compartilhá-lo aqui no blog. Saudações do Brasil!" — Mauther


Link to sheet 01:
Ravnerede.Castle.Vintage.Papercraft.by.Illustreret.Familie.Journal.01





Below, more three works by John Dunn: